DLS proofStation 10

Specifications

Perfect lighting technology and functional design. No operating hours meter and no expensive replacement lamps. Now you can match colors withour worrying for years. The continuously high light quality of the LEDs far exceeds the minimum requirements according to ISO 3664:2009. The mix of multiple colored LEDs generates an even more harmonious and complete light spectrum than that of conventional fluorescent lamps. Dimmable proofStations with a practical pull-out keyboard and monitor rail are available for soft proofing applications.

Unique LED light technology by JUST, Fogra certified to ISO 3664:2009, Pat. No. US 8,592,748 B2
Switchable light: D50 and D65 according to ISO 3664 and ISO 3668
UV content can be enabled or disabled for either illuminant regarding new and old ISO standard
UV-ONLY: UV-A for the detection of optical brighteners
Continuously dimming and USB connection for soft proofing applications
No color shifts while dimming
With SP-Version including pull-out keyboard and monitor mount
No preheating after turning on
20x longer operating life despite to fluorescent lamps (> 50.000 h)
Stable light output during the entire lifespan
Annual relamping not required
Extremely homogeneous as well as glare- and reflection-free illumination, thanks to Fresnel-type prismatic lens
2000 lux illuminance according to ISO standard
Color Rendering Index (CRI) Ra ≥ 95
Exact color coordinates (10°):
D50: x = 0.3478 / y = 0.3595 (≤ 0,002)
D65: x = 0.3138 / y = 0.3309 (≤ 0,002)
Low metamerism index in the visible range: ≤ 0.8 (MIvis)
Low metamerism index in the UV range: ≤ 0.6 (MIuv)

Illuminant characteristics

Asymmetrical light design for viewing from one side (fixed viewing position)
Almost no reflection and glare
Switch off UV content for assessment to old ISO 3664
Noon daylight (LED 5000 K, D50 CIE)
Average daylight from the northern sky (LED 6500 K, D65 CIE)
UV-Only (UV-A)

Features

USB interface for connection to PC
Illuminants are dimmable
« general product features of all devices; special featuers of particular devices »
Different illuminant sequences can be programmed
A monitor mount is included

Applications

For flat viewing samples, such as paper, fabrics, coatings
« general product features of all devices; special featuers of particular devices »
Good detection of metamerism thanks to multiple illuminants
Fit for soft proofing – Device brightness can be adapted to monitor brightness (for SP)